You’re not alone if you encounter the mysterious “OE” error code on your LG washing machine. This code can be a source of frustration but don’t worry. This article will delve into what the OE error means and explore its common causes.
Finally, we will guide you through the steps to resolve it. Following the steps outlined in this article, you can troubleshoot and resolve the issue, restoring your washer to its optimal functionality.
What Does OE Mean on LG Washer
The “OE” error code on an LG washer is a diagnostic indicator that signifies a problem with the machine’s drainage system during washing. When this error code appears, it warns that the washer is encountering difficulties in draining the water used during a wash cycle.

The primary issue is that the washer is attempting to drain, but it’s not doing so quickly enough, as detected by the control panel. This problem can manifest for various reasons, including a kinked drain hose, a clogged drain pump filter, issues with the drain pump itself, or even a malfunctioning pressure switch.
Read also: Do Coffee Grounds Clog Drains?
How to Fix OE Error on LG Washing Machine
Let’s take a closer look at the typical causes behind this issue of LG OE error code and how to fix it:
● Kinked or Clogged Drain Hose
One of the primary reasons for the OE error code is a kinked or obstructed drain hose. Before delving into more complex solutions, inspecting your drain hose for any kinks or blockages is a good practice. To address this issue, follow these steps:
- Disconnect the washer’s electricity.
- Empty the washer drain hose into a bucket or sink.
- Let the washing run for a few minutes after restarting.
- Cancel the cycle and open the door to check for water draining.
- Repeat instructions until the drain is clear if water persists.
- After draining, reconnect the drain hose and plug the washer.
- Start a new cycle and check for the OE error code. If it persists, try something else.
● Clogged Drain Pump Filter
Another common culprit for the OE error is a clogged pump filter. Regular maintenance is vital to preventing this issue. That’s why the drain pump filter should be cleaned of any debris every month. To address a clogged filter, follow these steps:
- Disconnect the washer from the power.
- Remove the tiny rectangular cover at the bottom front of the machine to open the drain pump filter cover.
- Remove the little hose and pour the water into a dish.
- Reattach the drain pipe after draining.
- Anticlockwise, spin the circular cover to remove the filter.
- Remove the pump filter and clean it by hand.
- Pump filter and access cover reinstall.
● Faulty Drain Pump
The drain pump removes water from the washer tub during the washing cycle. If neither a kinked drain hose nor a clogged filter is the issue, the culprit may be a malfunctioning drain pump. Here are what you can do:
- Unplug the washer from the power outlet.
- Inspect the drain pump to ensure it is not obstructed and no debris is caught.
- If the drain pump is damaged, it will need to be replaced.
● Other Factors
While less common, other factors, such as a malfunctioning pressure switch, can trigger the OE error code. In such cases, it may be best to seek the assistance of a professional technician to diagnose and resolve the issue directly.
● LG Washer OE Code Reset
Whatever the cause is, resetting the washer is the first solution you may try. Follow these straightforward instructions to reset the control board:
- Disconnect the power source for five minutes.
- Reconnect the power by plugging the washer back in.
- Start a test cycle to check if the error code has cleared.
Read also: What Does SUD Mean on Samsung Washer
This simple reset can resolve OE errors due to control board glitches. If the error persists, address the underlying problem promptly to prevent further complications. By understanding what does OE mean on LG washer and how to fix it, you’ll be well-prepared to tackle the challenges.