You might ask, “what does SE mean on a Samsung washer”? This code is a drainage issue indicated by a SE error number on your Samsung washer. The identical problem may appear on some models as a 5E or nd error code. Be cautious not to confuse it with an E5 error code, which denotes that the heating element is malfunctioning.
What does SE Mean on a Samsung Washer?
In Samsung washers, the SE error code appears rather frequently. It frequently occurs when a user neglects to take good care of the equipment. The problem happens during water draining, according to the SE error code.
Ensure there isn’t too much water in the hoses before you detach them since the washer can suddenly start spewing it out. If the tub is complete, it is preferable to manually empty the washer before unplugging any hoses. When resolving the Samsung washer SE code, be sure you have a large container to catch the water.
Samsung Washer Error Codes:
Why Does the SE Error Code Appear?
The washer should begin the laundry rinse cycle when the program has finished washing. Unfortunately, the Samsung washer error codes frequently occur on Samsung washing machines’ displays. The software instructs the device to drain the filthy, soapy water at this stage after washing the clothing.
The device then discharges clean water for rinsing. This phase is when the issue arises. The system is unable to remove the dirty water. The control board generates the SE error code.
When the gadget can’t drain water, this error arises.
- The dirt locked the drain filter so water could not enter the drain hose.;
- A blockage exists at the connection to the filter, the junction with the siphon, or the drain hose;
- Broken drain pump. Thus you cannot empty the water.
However, please don’t mistake it for the E5 code. It suggests that the washer’s heating element is broken.
How to Fix Samsung Washer with SE Code
- There is a Need to Clean the Pump Filter in Front-loading Washers
You may use the front of many Samsung front-loading washers to access the pump filter or debris filter. After 40 loads of washing or at least once a month, Samsung advises cleaning the pump. Maintaining a clean pump filter will keep the washer draining properly and stop smells, mold, and mildew.
- Check the Drain Hose
The drain line may be kinked, constricted, or blocked by a small item if the washer won’t drain. It’s also conceivable that water has gotten inside the drain hose exit, making it harder for the washer to empty. It will be necessary to replace the drain hose if it cannot be cleaned out or connected correctly.
Placement of the drain hose is also essential for efficient drainage. The drain hose can be attached to a standpipe, a waste trap, or a fixture on the pipe. For example, if the drain hose for your washer is attached to a standpipe, it should hook over an open standpipe attached to the waste pipe.
- Defective Drain Pump
A faulty drain pump may cause an issue if the drain pipe is not blocked. A little item, a piece of clothing, or a broken impeller might blame the pump’s mechanical failure. If the impeller is undamaged and there is no obstruction, the pump may have experienced electrical failure.
Now you reach the final verdict on the ‘what does SE mean on a Samsung washer?’ question. The pressure switch may be obstructed or broken if inspecting the filter, drain hose, and drain pump hasn’t resolved the problem. The pressure switch sends when to drain or add water to the control board.
If the control board receives incorrect signals, it may poorly drain since it doesn’t think it needs to. Considering the pressure switch is an inexpensive component, you should test it with a multimeter before replacing or altering it.
There are several reasons why an error code appears, including a broken control panel or timer and the source of the error. These components typically need to be changed or serviced by a knowledgeable professional. In addition, they may be difficult to test using a multimeter.