Learning how to fix a leaking plastic water pipe is one of the crucial household management skills. Pipes made of plastic are everywhere, and many people will immediately call a professional when those water pipes begin to leak.
Most of those pipes can be fixed in no time without having to contact an expert or taking formal courses. The only thing that you ought to know is the right product and method to get your leaking pipelines fixed.
First-Hand Knowledge
Having personally repaired numerous PVC pipes over the years, I can attest to the effectiveness of several quick and easy methods to address leaks. In my experience, identifying the root cause of the leak, whether due to aging, improper installation, or exposure to harsh weather, is crucial for a successful repair.
How to Fix a Leaking Plastic Water Pipe
Many homeowners would like to find a long-term solution to the piping system issue. However, temporary solutions can be as effective as permanent repairs if you can locate the problem quickly.
The best repair product for this problem is PVC pipe leak repair tape. It’s a stretchy, sticky product that is easy to apply to the leaking area. Here is how to use it:
- Once you locate the leak, you must wrap the tape around the damaged spot but ensure the wraps are stretched over the wider spot.
- You can wrap the repair tape spirally to conceal the entire surface if there is more than one leaking area. Even though it’s the easiest method, it can’t be used to fix severe leaks.
Personal Experience
From my personal experience, using fiberglass resin tape or epoxy putty can be particularly effective for small to medium leaks. For instance, fiberglass resin tape hardens around the pipe, providing a durable temporary fix. Similarly, epoxy putty can create a solid seal around the damaged area, often lasting several months to years.
| Method | Application | Duration |
|---|---|---|
| PVC Repair Tape | Small leaks | Temporary |
| Fiberglass Resin Tape | Small to medium leaks | Several months |
| Epoxy Putty | Small to medium leaks | Long-term |
| Replacement of Pipe Section | Severe leaks or damaged sections | Permanent |
| Rubber and Silicone Tape | Small leaks, not suitable for joints | Temporary |
Fix a Leaking Plastic Water Pipe Joint
- Turn off the water source
The easiest way to fix a leak pipe joint is to remove the damaged section since no repair product can fix this issue. To do this, you need first to turn the water source off.
- Remove the defective waterpipe
To remove the damaged piping section, use a decent pair of cutters specifically used to cut PVC. If the leak area is visible, consider cutting it on either section of the spot. This means that all the affected spots are removed.
- Apply the primer and plastic pipe cement
Once you remove the defective pipe and let the water well drain, apply the adhesive product on the outer side of the new pipe and within the old cap. Then, apply the cement using a brush to the outside of the new pipe and inside the old cap.
- Insert the new pipe
You can start installing the replacement tube by spinning and pressing it. This gets the water tube into the right position and makes the cement spread all over the joint.
How to Repair Cracked PVC Pipe
- Identify the damage
Before you start implementing the methods for fixing a leaking plastic water pipe, it’s crucial to turn the main water supply off so that it doesn’t hinder the repair process. Depending on the severity of the crack, the entire pipe doesn’t have to be replaced in some cases.
- Prepare the sealant
A sealant is the best solution to fix temporary issues like cracks. However, the affected pipe needs to be prepared properly before applying the sealing product. Also, keep in mind that pipes made of plastic have different capacities to handle the sealant and require some specific procedure.
- Apply the sealing agent
With a small tube, apply the sealant over the cracked section. Also, follow the correct instructions to prevent the sealing product from being incorrectly applied, leading to further problems.
Keep the sealing product in the cracked spot to ensure the cracks are fully sealed. Also, avoid excessive pressure because it could spread the crack, and you will need to implement other methods to fix a leaking plastic water pipe that is rather complicated.
