White Rodgers Thermostat Not Responding Causes and Troubleshoots

White Rodgers Thermostat not responding is something that you will encounter when using the thermostat at home. It is believed that thermostat is very essential to keep the temperature in your house.

However, sometimes it gets some troubles, and you should solve them. If your thermostat is the one from White Rodgers, the troubleshooting problem will be shown below.

Why Your White Rodgers Thermostat Not Responding ?

There are several common reasons why the White Rodgers Thermostat not responding. Most of them are very simple to solve. Read the information below, and you will be able to solve the problem on your own without having to bring the thermostat to the store or contact the tech support. These are the common causes and troubleshooting for your thermostat problem.

Read also : How to Program White Rodgers Thermostat

White Rodgers Thermostat Not Responding

Lack of Power

Lack of power is one of the main things that cause the thermostat to stop working. Essentially, in this case the battery is low and you need to replace them. All you need to do is just open up the back of the case and then remove the old batteries. Insert new, fresh batteries and close the back. Then, press the White Rodgers thermostat reset button to finish.

Read also : White Rodgers Thermostat Battery

Dirty Components

Thermostat is often placed in the basement or in the corner of the room. Of course, they will collect dirt and debris. When your thermostat is not displaying anything, it is probably because the component inside of it is dirty. White Rodgers thermostat troubleshooting no display can be done by cleaning up the inside of the thermostat carefully and delicately.

Loose Wiring

Loose wiring is a massive cause to make the thermostat stop working. When the wiring system is loose, there is no way that the whole thing is going to work properly even though the White Rodgers thermostat battery is fresh and new. If the wiring is loose, you need to tight them up using screw driver carefully.

Corroded Wiring

When the thermostat is placed outside, sometimes they can catch moisture and water. As the result, the wiring will be corroded and not easy to fix. When the wiring is corroded, most of the time you will have to replace the wiring component. It may take a lot of times and money but that is the only way to solve the problem.

Jarring Bump

If the thermostat is not working properly by displaying wrong stuff, you need to check the surface where you place the thing. Make sure that the thermostat is placed on level surface and there is no bump on the back of the thermostat.

Now, you have seen a lot of reasons why the thermostat won’t work. You can try all of them whenever the machine is not working. They are simple since all you have to do is like removing the battery and cleaning up the inside.

That’s why when your thermostat does not work properly; you do not need to be panic as you know the White Rodgers Thermostat not responding troubleshooting.