Do you have a water heater? If you have it, you have to know the steps for adjusting the water heater. There is a simple step that can be done to adjust the water heater. Read some information below until you finish to know more about the water heater and how to adjust it.
Why do We need to Adjust How Water Heater?
When we have a water heater, we may need to adjust the temperature of it. If the temperature is too hot, it may be dangerous for us. It will also increase bills per month. So, what is the best way to prevent it? Yes, reducing the temperature of the water.
It will decrease the bill, and you still able to use warm water to take a bath. But for people who don’t get the problem with the water heater bill, you don’t have to adjust it to a warm temperature.
Although the water heater’s hot temperature can increase the bill, there is also the benefit of hot temperature. Hot temperatures will kill bacteria of water. Sometimes, the water heater owner may inhale the smell on the water. It means there are bacteria in the water. Hot temperatures can kill bacteria. You have to know the step to adjust the water heater temperature to use the desired temperature of the water heater.
How to Adjust Hot Water Heater
Actually, the step to adjust the water heater’s temperature is straightforward. You must find the dial on the front of the gas control valve. After finding it, you can adjust the temperature—hot or warm. But you will not see the specific temperature of your water heater. How do you see the specific temperature of the water heater?
Recommended temperature of the water heater is set to 120 degrees. If you feel so confused about the temperature, you can place the water from the water heater into a cup.
After that, a thermometer is used to determine the temperature. If the temperature is lower or higher than 120 degrees, you can readjust the water heater temperature. You can adjust it based on your needs. But 120 degrees is the recommended temperature.
For electric water heaters, ensure that the power to the water heater is turned off at the circuit breaker before making any adjustments. This is a critical safety step to prevent any electrical accidents. Similarly, for gas water heaters, it’s essential to know how to safely light the pilot light if it goes out during the process.
When adjusting the temperature, it might be necessary to remove the access panel on some models. Make sure to replace the insulation properly after making your adjustments to maintain energy efficiency.
Modern tankless water heaters offer a more straightforward approach to temperature adjustments, often featuring a digital display for precise control. Regardless of the type, it’s generally recommended not to exceed 140 degrees Fahrenheit to prevent scalding risks and conserve energy.
This is some information for you about the steps to adjust the water heater temperature. Whenever you need to adjust the water heater’s temperature, you can use the simple step mentioned above. With that simple step, you will be able to adjust the water heater whenever you need it.
Finally, you will get so many benefits from a water heater because the water heater’s temperature can be set based on your needs.
