A smoke detector could be the key to your and your family’s safety. Therefore, you might want to ensure that this electronic unit is in good condition. However, some wonder why my smoke detector blinks red light every 15 seconds. Do you also happen to experience things like this?
If so, you need to check on its conditions immediately. You do not want to take a risk for your safety. Here are some discussions about the cause of the blinking red light and how to solve it. Check it out cause this is quite important.
Why is My Smoke Detector Blinking Red Every 15 Seconds
Blinking smoke detectors that go unusual may cause another problem. Hence, it is important to find the solution right away. However, before that, you need to decide on the source problem of it. Below is some matters that can make your smoke detector go broken.
- Regular Testing Needed
Some brands might give this blinking red as a sign to test the smoke detector. There is no need to panic; you only need to test the detector before any fire could damage the place.
- Normal Sign of Blinking
The red LED blinking could also indicate that the unit is working correctly. Some brands use this feature in their products. Make sure to read the smoke detector manual carefully to find the problem.
- Need New Batteries
A blinking red could be a sign of a low battery level especially if a beep accompanies the blinking. You could try to replace the batteries to find out if it is the cause of the blinking.
- Dust in Its Unit
The blinking red could also be caused by the dust or other material in its chamber. Try to remove or clean it regularly to prevent blinking. Do not forget to check the manual for some cleaning regulations.
Furthermore, in some models, a steady green LED indicates that the smoke detector is receiving power and operating correctly. In contrast, the green light may turn off when the detector is on battery power, emphasizing the need to ensure it is always connected to a power source or that the batteries are fresh.
- The Smoke Detector is Old
A Smoke detector,, like many other electrical units,, will not last forever. If this blinking red is happening and your detector is quite old. Try to change it to the new one to secure your safety.
- Lingering Smoke
After the detector is turned off, some sign of smoke might land in your place. That could be the cause of the blinking red. Wait for several minutes so it can come back to normal again.
- There is Smoke
Blinking red with a loud beeping noise shows smoke in your house. Search for the source of the smoke and stay safe if there is any danger.
How to Turn Off Red Light on Smoke Detector
You could try resetting the smoke detector to turn off the blinking red. Here are some of the steps:
- Ensure that the problem’s source is the smoke detector unit, not the smoke at your place.
- Find the reset button on the device.
- Push and hold the test button for longer than five seconds.
- If you hear any beep sound, release the hold.
- This way, you can reset the smoke detector easily.
- If the reset setting is not working and the blinking red is still going on, call for an expert to repair the smoke detector. You can try to replace it with a new one or change its parts.
Conclusion
Why is my smoke detector blinking red every 15 seconds? To be able to answer the question, you need to read the article carefully. If you read it thoroughly, you could use some of the information to solve the problem with your smoke detector because your safety is the number one priority.
