You may want to know how to clear Bobcat fault codes, especially if you have the machine. Bobcat is a manufacturer that makes different kinds of equipment and machinery, including loaders, tractors, skid steers, excavators, and telehandlers.
When its machine experiences a problem, you will see the (diagnostic) service code on the display. In this way, you’d know what to do.
The Importance of the Fault Codes
The code is crucial because it gives you information about what kind of issue you are having and the level of severity. It can be a minor glitch (which can cause a little bit of annoyance) to dangerous warnings that may include parts failure.
When you know the code, you can come prepared. Not only you can learn about the type of issue, but you know the right solution. Whether you can do the repair on your own or you need professional help, it all comes down to the codes. That’s why it’s never a good idea to dismiss or underestimate the faulty codes.
Bobcat Fault Codes List
It’s a good thing that Bobcat has its list of faulty codes, which can inform you about the problem. These codes can apply to all parts (and also aspects) of the product. It can be about the driving pump or the lift spool. The codes can also show you the specific side or part where the issue originates. If you want to check the codes or see the list, you can always go to the official website and view the list by yourself.
Some Code Examples
Here are some of the examples of how the code applies.
- M0909 has too low a fuel level. This code is commonly appearing on M-series (Bobcat) loaders as well as the telehandler models. No need to worry; the solution is pretty simple and easy. You only need to refuel and you’re good.
- H3916 left joystick not connected or no communication. It’s usually found within M-series loaders and excavators. It can be a hardware issue (such as the requirements for joystick replacement) as well as a software issue (like no signal or interrupted connection).
- H7404 no communication main controller. The controller on Bobcat doesn’t get enough power, which may result from the lack of lubrication for the transmission. You should check for any sign of fluid leaks.
Read also: The Most Important Bobcat Fault Code List
Since the fault codes are commonly designed for the brand’s usage and interpretation (which means that it’s meant for its internal ecosystem), it would be wise to always consult the manual. You don’t want to misinterpret the codes carelessly.
How Do You Reset the Code on a Bobcat
In most cases, the simplest way to deal with the faulty codes is to restart the engine. Oftentimes, restarting will resolve the issue, so you don’t need to do anything. However, these machines often come with an instrument panel and you need to access the panel to solve the problem.
This is why you need to consult your manual to find out whether you can do it by yourself, along with the knowledge of which buttons or switches to press.
If you have doubts about which button to choose or if you don’t know what to do, it’s always a good idea to contact Bobcat’s professional and certified technician. They can guide and assist you. After all, they are the ones having the familiarity with the internal machine and parts. Just don’t press anything if you have zero knowledge about the machine.
Final Words
Be advised that Bobcat’s faulty code lists are pretty lengthy. Check the code appearing on your panel and then match it up to the list. Ask a skilled expert about the codes or what to do. You may know how to clear Bobcat fault codes, but it doesn’t always mean that you know how to repair the issue.
